YLTL-SG LINK Series · Plug-in Skid Mount Light Tower
Ideal for those looking for a solid, high-performance and cost-effective solution in professional settings.
Stationary Base | 7.5 m | 4 x 320W LED | 100,000 Hrs
Request a QuoteLINK Series — Plug-in lighting
Product Overview
The challenge in large industrial yards isn't usually light — it's repositioning light when the work migrates. A towable trailer demands tow capability, a dedicated parking spot, and recabling every move. The YLTL-SG keeps the mast, base, and fixtures together. Forklift pockets on all sides let any operator move it into position from any angle, with the lighting system intact.
Power draws from any 15A industrial outlet on site. The plug-and-socket design lets you chain up to three units in series, which means fixed infrastructure can serve multiple deployments without electricians. Lower the mast, load the base, move to the next drop point, raise the mast, deploy. One floor crew member, no heavy equipment standby.
IP65-rated LED fixtures run silent and emission-free in environments where diesel is restricted or where noise matters. At a 100,000-hour rated lifespan, fixture replacement is not part of annual maintenance planning. The 55 mph wind rating holds position through overnight shifts without manual adjustment.
Features & benefits
Stationary footprint, Worksite flexibility
Forklift-ready on all four sides
Fork pockets on every side of the base let any forklift move the complete unit from any approach angle — no repositioning the truck, no disassembly, no rigging.
Square base with 4 outrigger jacks
Low center of gravity and equal-side footprint keep the unit stable on concrete, compacted gravel, and uneven yard surfaces without additional ballast.
340° rotation at any mast height
The mast rotates a full 340° without lowering — redirect coverage without touching the base position. Each fixture adjusts independently for precise beam placement.
Silent. Zero emissions
No onboard engine means no exhaust, no noise, no idle fuel burn. Runs near residential boundaries, and on sites where diesel is restricted.
IP65 fixtures rated to 100,000 hours
Sealed LED housings resist dust ingress and water jets in open environments. Rated lifespan runs to decades under normal operating conditions.
In-series power pass-through
The IEC 60309 inlet and outlet run up to three units from a single 15A circuit. Cover large areas off a single circuit with no additional wiring runs.
Technical Specifications
Engineered for performance & longevity
Wherever a power source is on site, the YLTL-TA is ready to run. From long-haul infrastructure projects to single-night events, it covers the ground that needs light.
Lighting System | |
|---|---|
Light Fixtures | 4 x 240W LED |
Input/output voltage | 50 Hz - 220 V / 60 Hz - 120 V |
Power inlet & outlet | 15A IEC 60309 (6H) |
Luminous flux | 4 x 31,200 lm |
Code Temperature (K) | 5,000 K |
CRI | 80 |
LED Lifespan | 50,000 hr |
Protection Rating | IP65 |
Trailer, Mast & Dimensions | |
|---|---|
Transport dimensions | 48" × 48" × 90" (1,220 × 1,220 × 2,290 mm) |
Operating dimensions | 85" × 85" (2,160 × 2,160 mm) |
Max. Mast height | 24.6 ft / 295" (7,490 mm) |
Mast actuation | Manual winch |
Mast rotation | 340° |
Wind Stability Rating | 88.5 km/h (55 mph)— fully elevated |
Base configuration | Square steel base, 4 × manual outrigger jacks |
Fork pockets | All 4 sides, standard clearance |
Let’s light up your jobsite together!
Ready to discuss your project?
Tell us about your site and configuration. We'll send a tailored proposal within 24 hours, including pricing for your specific setup, delivery options and lead times.
Request Solution & Quote